Firewall insulation installation

[Kris 90]

I’ve looked through my manuals and can’t fine a diagram that shows how to attach the firewall insulation. This is the thick rubber piece with the mat foam. I have the 7 push in rubber clips but can’t figure out how it goes on. 

[Brian Conway 264]

Picture, phillips and large washer, is from my car.  Might get you started or is this not the issue ?  Brian

[Kris 90]

I knew about the screws. There are rubber studs that go through the firewall. My car didn’t have them when I got it and the manual is zero help. 

[Brian Conway 264]

I was trying to suggest where to look, screw holes, for the original locations where you might try to attach your new pad.

[shelbyshelby 52]

After I broke a few tips off those Rubber plugs by pushing them in, I used a piece of the inner thread of paracord to pull the rubber tip thru instead of pushing with tools. I just tied the string onto the tip and soaped it and the came right thru.