Caseyrhe 650 Report post Posted June 21, 2020 Having a hard time finding the correct Rear brake hose for my 70 Grande. Old and new hard lines I bought have bigger threaded ends and won’t work on the 2 new hoses I bought. Part number on the brass block off the old hose is DOZA2A4488. 23129Y have read that a 71 mustang hose might be the ticket anyone ran across this issue before, solution?? Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted June 23, 2020 On my car there is only one rubber brake hose. Every other brake line is metal. So if the DOZA line pictured is your original then the hard line set you bought is incorrect ? Brian Quote Share this post Link to post Share on other sites
JET 445 43 Report post Posted June 24, 2020 Just cut the end off the hard line, fit the correct nut to suit your rubber hose and then re- flare the hard line. Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted June 24, 2020 12 hours ago, Brian Conway said: On my car there is only one rubber brake hose. Every other brake line is metal. So if the DOZA line pictured is your original then the hard line set you bought is incorrect ? Brian it is rubber, that is the block that attaches to the rubber hose and 2 metal lines connect to Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted June 25, 2020 Hose for the 71 came in today, we have a winner. Threads on block and hose are correct left hose- 69 center hose- new 71 repop right hose- factory 70 part number on bag from oreilys 1 69RavenConv reacted to this Quote Share this post Link to post Share on other sites