Bruce 0 Report post Posted June 19, 2020 I acquired a 69 coupe someone else's dream . Looks like they wanted a drag car the hole for the fuel tank has a heavy gauge steel plate over it with squared tube steel welded across connecting to the rear frame. They welded a box below the original spring hanger location on the rear frame with a bushing that would accept a spring hanger. So about three inches below the original hole through the frame for the stock hanger locate .Seams like a good job the frame is all beefed up as well. I can not find any info regarding this mod . Help me understand this will work .I will take pics tomorrow thanks Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted June 19, 2020 Welcome to the forum Bruce. I started rebuilding a 69 Coupe 10 years ago that I also acquired as a shell. Quote Share this post Link to post Share on other sites