70 Grille & stone tray clips needed

[smh00n 87]

I need the plugs/nuts that go under the stone tray at the bottom of the grille as per the attached shot.

Also the clip or bracket that hold the middle of the grille to the centre support that holds the bonnet lock.

A real curly one is the 'speed nut' that the headlight bucket screws into, to allow for adjustment of the beam. Looks like it is a part.

I've looked at a few parts catalogs but I can't find numbers.

Anyone have a link to a supplier or the part numbers for all 3?

[aslanefe 333]

https://www.cjponyparts.com/69-70-stone-deflector-8-hardware-only-1969-1970/p/F137/

https://www.cjponyparts.com/amk-products-grille-mounting-hardware-kit-1969-1970/p/F139/

https://www.cjponyparts.com/70-headlamp-adjusters-14-hardware-only-1970/p/F3992/

 

[aslanefe 333]

https://www.cjponyparts.com/grille-support-1970/p/G6S/

https://www.cjponyparts.com/cj-classics-hood-latch-support-brace-1969-1970/p/M3547B/

[smh00n 87]

You are certainly the man. I forgot about CJ...

With the grille, I have the metal supports but looks like something goes from back of the plastic grille to this https://www.cjponyparts.com/grille-support-1970/p/G6S/

 

[aslanefe 333]

@smh00n As far as remember, the clip nut from the grill mounting hardware goes on the lower hole on that grille bracket and the screw attaches the grill to that clip nut. One of the plasic  push pins attaches the top middle of grille to the hole on top of the bracket. The other plastic push pins goes to the corners of grill. There are no other parts between the grille and that bracket.

[aslanefe 333]

Just looked at my 69. Correction to above, clip nut goes on to bottom middle attachment hole on the grill, the nut goes through the bracket to the clip nut.