edwardthomson51@yahoo.com 1 Report post Posted March 24, 2020 new floors with no hole for parking brake cable with foot pedal on a 70 coupe looking for spot to drill hole ....how many inches from side and how many inches from bottom bend in floor would help .. or do i just drill straight under pedal unit???? i have orig ford manuals and picture doesnt help at all.. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted March 24, 2020 As far as I remember, the parking brake goes through the toe board (not floor) into torque box and comes out of the torque box outside of the frame rail buy the gas line. There is a channel (like a slide) inside the torque box that guides the cable. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted March 24, 2020 If nobody has the dimensions, I will take picture (of a 70 Cougar, which should be the same) this evening with dimensions. Quote Share this post Link to post Share on other sites
Casgar 21 Report post Posted March 24, 2020 As exact as I can measure on my -69 Fastback with no floor. Also in metric millimeters (+/- 1 mm), just because. :) 1 mwye0627 reacted to this Quote Share this post Link to post Share on other sites
edwardthomson51@yahoo.com 1 Report post Posted March 24, 2020 THANK YOU SO VERY MUCH ....THIS HELPS.... AND YOU ARE RIGHT ABOUT IT NOT REALLY GOING INTO THE FLOOR.... WITH THE NEW FLOOR ALREADY WELDED IN (BY SOMEONE ELSE) I WAS LOST ON WHERE TO DRILL A HOLE .....THANK YOU AGAIN AND YOU CANT FIND ANY INFO ON THIS IN ANY OF THE MANUALS.... THANKS.....ED Quote Share this post Link to post Share on other sites
edwardthomson51@yahoo.com 1 Report post Posted March 24, 2020 2 hours ago, aslanefe said: If nobody has the dimensions, I will take picture (of a 70 Cougar, which should be the same) this evening with dimensions. ILL TAKE ANY PICTURE YOU CAN POST HERE.......THANKS ED Quote Share this post Link to post Share on other sites
latoracing 256 Report post Posted March 24, 2020 Hopefully you'll find an appropriate sized hole in the lid of your torque box to size the hole, if not, a drill and a rotary file will get you fixed up fairly quickly. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted March 24, 2020 6 hours ago, edwardthomson51@yahoo.com said: ILL TAKE ANY PICTURE YOU CAN POST HERE.......THANKS ED Looks like you got some good pictures with dimensions. The pictures latoracing posted looks like they are for a vert as it has additional inner rocker used on verts (or may be coupe or fastback he added the vert inner rockers). Use the dimensions from Casgar's pictures. On latoracing's first picture, you can see the 2 holes close to the frame rail on the torque box; inner hole (round one) is for fuel line, outher hole (D shaped) for parking brake cable (with a channel for the cable). 1 latoracing reacted to this Quote Share this post Link to post Share on other sites
edwardthomson51@yahoo.com 1 Report post Posted March 25, 2020 THANK YOU GUYS FOR ALL THE PICS AND INFO......IT DOES HELP.......YOU ARE RIGHT THE VERT IS DIFFERENT THAN THE COUPE .... THIS ALL HELPS ME DRILL CORRECTLY... WISH ME LUCK ED Quote Share this post Link to post Share on other sites