Billet Tie Rod Adjusting Sleeves

[cobra445jet 1]

Anyone using the solid billet tie rod adjusting sleeves? Do they work well? Any favorite brand? 

[lanky 44]

My setup:

70' spindles

Manual steering linkage

Borgeson steering box

Baer tracker bump steer kit (comes with billet aluminum tie rod adjusters)

I have no idea why this is the case, but I actually had to slightly shorten my stock style inner tie rods to get the toe correct on my car. There wasn't enough adjustment. I did all the above stuff at once so I'm not sure why this was the case. 

Also, if you go this route, I recommend getting aluminum spanner wrenches so as to protect the adjusters. I made the mistake of trusting the alignment shop, and those fools used locking pliers and scratched up my new parts. I wanted the bump steer adjustment not necessarily the billet adjusters.