prm2770 11 Report post Posted February 3, 2020 I need to replace the passenger fender on my 69 Mach. The one we put on when we did the original restoration 15 years ago was a thin piece of crap that warped as soon as we took it out of the box. We reinforced it with some flat steel but over the years it has gotten more and more wavy. What brands have y’all used and have you been happy with it? Dynacorn, goodmark, etc? Thanks! Quote Share this post Link to post Share on other sites
Dave R. 85 Report post Posted February 3, 2020 My '69 Mach 1 required either new quarters or extensive repair of the existing panels. My restorer pointed out the advantages of replacing the panels. When I agreed with him he insisted on Dynacorn panels. He had used them in his own personal project. They fit and look great. This was 6 1/2 years ago. Hopefully their quality has not declined. Good luck. Dave R. Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted February 3, 2020 Still happy with Dynacorn Quote Share this post Link to post Share on other sites
prm2770 11 Report post Posted February 3, 2020 Thanks for the reply. Wish I could remember the brand this fender is bc I sure as .....wouldn’t buy it again. I’ll grab a dynacorn and hope for the best. Thanks!! Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted February 4, 2020 You will still have to do some gap work but the last ford tooling fender i bought required more than the Dynacorn i had on the other side Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted February 4, 2020 I would recommend looking for OEM first. I have 2 original fenders stripped to bare metal and willing to sell. Quote Share this post Link to post Share on other sites