Spider69 16 Report post Posted January 26, 2020 Hi, I will replace my front and read shock absorbers. Actuallly, I have Koni front and rear, rear are not to be changed but front yes. Anyway I'm gonna replace both. I could see KYB Gas-a-just KG5517 and KG4517! doeas someone use or know this ones and can you tell me about? Thanks for reply. Chris Quote Share this post Link to post Share on other sites
1969_Mach1 334 Report post Posted January 26, 2020 Are your Koni shocks old and worn out? If not, it seems like a downgrade to KYB Gas-A-Just shocks. If you have stronger than stock springs, the KYB shocks will make the ride more harsh. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted January 26, 2020 Check out Ride Tech coilover for a nice upgrade Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted January 27, 2020 CPP Coil over conversion for the front end is what I swapped to... Came with Viking Double adj Coil overs and used stock mounting locations but removes the Spring perch... and they were right at $400.00 for the set..I LOVE MINE Quote Share this post Link to post Share on other sites
Grabber70Mach 108 Report post Posted January 29, 2020 Call Shaun at Street or Track Or John or Sherri at Opentracker racing products They are both great assets to our hobby and will steer you straight. 1 mqu02 reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted January 29, 2020 I talked to CPP while we were at SEMA. They would be the best bang for your buck, compared to S or T. Quote Share this post Link to post Share on other sites
lanky 44 Report post Posted January 30, 2020 Just to put it out there, I have Bilstein shocks with the "sport" valving. Those with the common .620 drop springs were to stiff for a street car IMO. I have to replace my springs anyway so I'll be getting softer ones, and I imagine the combo will be a lot better with different (softer) springs. Quote Share this post Link to post Share on other sites
mqu02 30 Report post Posted February 3, 2020 On 1/29/2020 at 7:15 AM, Grabber70Mach said: Call Shaun at Street or Track Or John or Sherri at Opentracker racing products They are both great assets to our hobby and will steer you straight. I completely agree with this recommendation, and also recommend a street valved Bilstein setup. I love the set I have, and it was a huge upgrade from what I had before. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
Spider69 16 Report post Posted February 3, 2020 Hi guys, Got an error message opening ridetech.com ?? maybe because I'm in France! Front Koni are worn out yes, and I decided to replace front and rear. I have stock springs, so I guess KYB should not destroy confort :), I hope so. I got the new shocks, install next week, I let you know Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted February 3, 2020 Viking is a spin off of QA1 which is what we use. They are the same double adjustable with 18 settings for rebound and 18 for compression. Quote Share this post Link to post Share on other sites
Vicfreg 791 Report post Posted February 5, 2020 I have Viking coil over with GlobalWest (+) 3 UCAs and open tracker LCAs on the front and Bilsteins on the back. Quote Share this post Link to post Share on other sites
