Mike65 475 Report post Posted January 18, 2020 I am getting ready to install the spark plugs & make the spark plug wires for the 5.0 for my 69 Coupe & was wondering what everyone else has done to keep the spark plug wires neat & off the engine & the exhaust. Pictures & product info and/or a link to said part would be a great help. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted January 19, 2020 I use and like these, they use the valve cover bolt holes to mount. I paid much more for mine years ago. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted January 26, 2020 I use something similar, but mine have a black powdercoated plate that the wire separators mount to. Think I got them at Summit Racing. Quote Share this post Link to post Share on other sites
toranav8ss 16 Report post Posted January 27, 2020 Billet Specialities separators with Ford Performance valve cover bolts. Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted January 27, 2020 I like the MSD Pro Clamps. They have an upper and lower half that snap together and have a screw hole in the bottom half to anchor it to a bracket. I just run mine over the top of the valve covers like Ford originally did. Plus that keeps the majority of the plug wires further away from heat from the headers. Your motor should have the firing order 1-3-7-2-6-5-4-8, so it's a good idea to keep wires #6 and #5 apart from each other to eliminate the possibility of crossfire. They won't look as tidy, but at some point function is more important. Quote Share this post Link to post Share on other sites