Midlife 814 Report post Posted May 13, 2020 Just lengthen the body a bit. C'mon...it's not that difficult to do with a chain and a come-along. Might need a metal stretching wheel as well. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted May 13, 2020 I guess I could use them when I start making the 4drs next :) Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted May 13, 2020 Dash is ready to send out and get anodized in black tomorrow. Very happy how this turned out:) Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted May 15, 2020 Modified the tailpipes and made them a separate piece so they can be rotated for your desired height. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted May 24, 2020 Our first Bronco being picked up and headed to Ohio. This is a good friend of ours that let us do a lot of R&D for some of the new products we will be making. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 4, 2020 I decided to be a little different on this build compared to the others . We started out having some metal formed to the curvature of the doors and end caps and welded them in the bedside. We also welded the the end caps solid to the bed. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 4, 2020 Laying down some mud :) Got the glove box done. They did this in a Hard Coat, instead of just black anodized, it's a lot harder finish. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 6, 2020 About ready for the first round of primer. This is the way Ford should have done the bedside, looks 10 times better having the contour the same from the front all the way back. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 8, 2020 It's in Epoxy primer. 2 mikee and Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 9, 2020 Dash is done. 3 mikee, RPM and Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 10, 2020 Working on our roll bar. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 11, 2020 I'm having a fixture made for the roll bars so when we get them they will be welded and powder coated and ready to install . Quote Share this post Link to post Share on other sites
Machspeed 219 Report post Posted June 12, 2020 Rich, you're really getting after that Bronco. I see some nice stuff coming from you for future Bronco lovers too. You got at least two Mustangs in there, what's going on with them? Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 12, 2020 1 hour ago, Machspeed said: Rich, you're really getting after that Bronco. I see some nice stuff coming from you for future Bronco lovers too. You got at least two Mustangs in there, what's going on with them? On the Cougar, the owner is getting the run around on his tranny. He thinks he will have to buy another new one and settle up with Tremec later. On the green 67 he added a E-Stop. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 12, 2020 First round of Epoxy primer. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 13, 2020 The roof plug is buffed and waxed and ready to make a mold :) Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 16, 2020 Here's a completed dash. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted June 18, 2020 Looks nice, it's really clean. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 20, 2020 First round of Epoxy primer. The guys really like all the special stands I made for all the sheetmetal. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 22, 2020 The mold for the top is done, working on the sides and the lift gate. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 30, 2020 The rear lift gate mold is done, that just leaves the 2 sides Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted June 30, 2020 Why fiberglass instead of metal fabrication? Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted July 1, 2020 Would be lighter than a metal top ,no dents from going under tree limbs Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted July 1, 2020 You can buy the metal roofs from Dynacorn, but then you have a lot of prep time and painting. since ours will be carbon fiber, you just bolt it on and it's a fraction of the weight. Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted July 1, 2020 Go with the wood top for style points! Quote Share this post Link to post Share on other sites
