Headlight Switch

[newstang 388]

who makes the best OEM style headlight switch? 

I see there are a bunch out there, but they don't have that angled cup on it.

[1969_Mach1 333]

I don't think that angled cup is included with any of the available light switches.  If yours is missing , somebody here might have one they can part with.  If not, Perogie Enterprises likely will have a used original.

[mustangstofear 608]

I would  guess  their all made overseas. 

[newstang 388]

yea im missing the switch, i figured all that was made in china.

maybe mtf should make them :-)

 

 

[mustangstofear 608]

I have to many new products I'm  working on  :)

[Caseyrhe 650]

Oreilys sales the switch with the angled cup attached. Around 20.00 if I remember correctly. 

[mustangstofear 608]

That's a good deal.

[Caseyrhe 650]

DS180, 17.99

[unilec 57]

11 hours ago, mustangstofear said:

I have to many new products I'm  working on  :)

Be good if you could make a lower replacement panel skin for the inner door panel.

[mustangstofear 608]

Tooling costs are  through the  roof,  even  overseas.  Was looking at  new Qtrs  for the  Bronco,  cost could be 150,000 - 200,000 :(

[newstang 388]

9 hours ago, Caseyrhe said:

DS180, 17.99

thanks, ive been reading the reviews for the Standard switch, none of them are good. I dont know if its installer error or not.

[newstang 388]

found it on amazon for under $15, bought 2 just in case

https://www.amazon.com/Standard-Motor-Products-DS-180-Headlight/dp/B000C7URHC/ref=olp_product_details?_encoding=UTF8&me=

 

[Caseyrhe 650]

41 minutes ago, newstang said:

thanks, ive been reading the reviews for the Standard switch, none of them are good. I dont know if its installer error or not.

Only issue I’ve had out of the 4-5 I’ve installed is the dimmer portion not being all that secure to where I jacked the alignment up  and had to pull it back out so I could install the shaft.