Debbie 1 Report post Posted September 7, 2019 Hi How can I raise the front seats in my mach1 and make them go forward a inch or two? I know use a cushion Quote Share this post Link to post Share on other sites
shelbyshelby 52 Report post Posted September 8, 2019 Fabbing some spacers from 1” square tubing to go between the seat and the tracks comes to mind. Never seen it done though. Most complaints from sportsroof owners involve lowering the seats for headroom and leg room under the steering wheel. Do you have access to a mig welder? Quote Share this post Link to post Share on other sites
69Stanger408 82 Report post Posted September 8, 2019 Must be nice :) 2 1969_Mach1 and RPM reacted to this Quote Share this post Link to post Share on other sites
Debbie 1 Report post Posted September 8, 2019 No I don’t have a mig welder Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted September 8, 2019 Go with TMI, that should jack you up in the air high enough. 2 RPM and 69Stanger408 reacted to this Quote Share this post Link to post Share on other sites
danno 128 Report post Posted September 9, 2019 I thought about the same thing in mine. Put spacers under the tracks and above the carpet. i am not sure how long the bolts are that go through the floor. I do not know if you could get an extra inch out of them. Maybe there is a way to put in new and longer bolts? Quote Share this post Link to post Share on other sites