newstang 388 Report post Posted June 4, 2019 Im not going to do a fold down rear seat because I cant find one for a reasonable price. I got this tray but have no idea what i need to mount it. can anyone shed some light on this? Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 by the way, is that a blower defroster that goes in the center there? Quote Share this post Link to post Share on other sites
ClubSport 29 Report post Posted June 4, 2019 Looks like a hole for a super speaker... Quote Share this post Link to post Share on other sites
Casgar 21 Report post Posted June 4, 2019 Mine was just mounted with 7-8 screws along the perimeter. The tray in your picture is mounted upside down. I can link a picture of mine later when I get home if you want. You can mount speakers in some of the holes, but I don't know if that was an option from the factory. No defroster. Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 4 minutes ago, Casgar said: Mine was just mounted with 7-8 screws along the perimeter. The tray in your picture is mounted upside down. I can link a picture of mine later when I get home if you want. You can mount speakers in some of the holes, but I don't know if that was an option from the factory. No defroster. ha, of course its upside down :-) i didnt even think it would go in the other way :-) Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 So then I assume those standoff brackets need to be removed? what supports the pan forward of where it mounts to the rear? Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 I'm starting to see how it goes in, the problem is I'm missing brackets. what is needed here? and are there other brackets I need? Quote Share this post Link to post Share on other sites
Casgar 21 Report post Posted June 4, 2019 Will this anser your question? http://fyi.boardhost.com/viewtopic.php?pid=24681 Since I bought my car without that panel I can't anser from personal experience. Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 19 minutes ago, Casgar said: Will this anser your question? http://fyi.boardhost.com/viewtopic.php?pid=24681 Since I bought my car without that panel I can't anser from personal experience. can't really tell but it looks like it has brackets up top on the sides too. There is one person here who will know all this for sure,,,,, RIDGERUNNER ! Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted June 4, 2019 Give this thread a read: Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 2 hours ago, jmlay said: Give this thread a read: this was very helpful, thanks! Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 now the question is, where can i get these brackets? Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 4, 2019 i found this, it gives a pretty decent layout http://www.relicrecyclery.com/groovygreen/page15/LE600_15.htm Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted June 4, 2019 The brackets for the bottom of the seat back are the hinges for the fold down seat,the seat is just solid mounted ,the top of the seat back also has a solid mount bracket ,there is a metal cap on top of the seat back that covers the seat back top and the package tray ,there is also a small fiberglass cover at each end of the top cap Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 5, 2019 1 hour ago, Ridge Runner said: The brackets for the bottom of the seat back are the hinges for the fold down seat,the seat is just solid mounted ,the top of the seat back also has a solid mount bracket ,there is a metal cap on top of the seat back that covers the seat back top and the package tray ,there is also a small fiberglass cover at each end of the top cap I have the trim for the top and the two fiberglass ends. Do you have any of the brackets? Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted June 5, 2019 No ,sold the last set quite a while ago Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 5, 2019 1 hour ago, Ridge Runner said: No ,sold the last set quite a while ago looks like ill have to fab-em Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted June 5, 2019 Theu are sort of angle iron ,it wouldnt be hard to make them Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 5, 2019 i guess this is what i need for the upper ones: Quote Share this post Link to post Share on other sites
skidmarky 50 Report post Posted June 6, 2019 I may have a few pieces you are looking for. Do you need the hinges at the bottom of the seat back? What do you need besides the brackets pictured in the post above? Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 6, 2019 2 hours ago, skidmarky said: I may have a few pieces you are looking for. Do you need the hinges at the bottom of the seat back? What do you need besides the brackets pictured in the post above? hi thanks, yes i need the bottom and tops thx Quote Share this post Link to post Share on other sites
skidmarky 50 Report post Posted June 7, 2019 I only have one of the top brackets, pretty sure I have a set of the bottom hinges but will look tonight. Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted June 7, 2019 2 hours ago, skidmarky said: I only have one of the top brackets, pretty sure I have a set of the bottom hinges but will look tonight. Thanks for checking, I now have the bottoms from a very generous brother poster. (latoracing) Quote Share this post Link to post Share on other sites