ksquared 13 Report post Posted May 31, 2019 Is there a conversion kit for a big block & a 4spd toploader? Bellhousing is a Lakewood shield. What I've seen so far is for a T5 etc. Quote Share this post Link to post Share on other sites
Hux 45 Report post Posted June 1, 2019 Pedal conversion to hydraulic master cylinder should be no different. Modern Driveline has the gear. I have not fitted mine yet but very nice - blend of willwood parts and their own from what I can see. Slave cylinder just do to the concentric slip on type - again Modern have them for top loader. I’m running Cleveland with Aussie bellhousing so it is a bolt on slave. Quote Share this post Link to post Share on other sites
ksquared 13 Report post Posted June 1, 2019 Thanks Hux. I was not aware of that company. I'll check them out. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted June 2, 2019 In the process of putting my 69 Coupe back together I converted to a hydraulic clutch system which I purchased from Modern Driveline. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 2, 2019 Modern Driveline is who we use also. We make a patch panel for that area, then drill the correct size of hole we need. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 2, 2019 This is what it looks like. Quote Share this post Link to post Share on other sites
Hux 45 Report post Posted June 2, 2019 Why the patch panel MTF? Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 2, 2019 To fill the holes we no longer need, and to drill the correct size of hole we need. Quote Share this post Link to post Share on other sites