jkish 0 Report post Posted April 4, 2019 When restoring a 69 coupe I bought a 1987 Mustang for its tranny and 302 EFI system. I would like to know if the 87 AC system would work with my 69. Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted April 9, 2019 Would probably take more effort than its worth honestly, especially after removing the stuff from one car and getting new hoses made up to fit, re-sealing everything etc... Just spring for the classic auto Air kit and be done with it. 1 jkish reacted to this Quote Share this post Link to post Share on other sites
danno 128 Report post Posted April 10, 2019 The compressor is maybe the only thing that would work in your coupe. If you have an AC car already, then it probably would work, but like Mike said, getting the fittings and hoses could be a problem. If you do not have a factory AC car, then go with a new kit ( maybe without the compressor??) 1 jkish reacted to this Quote Share this post Link to post Share on other sites
stangman69 17 Report post Posted April 11, 2019 Great idea though, jkish. If the underdash component fit, theoretically you could fab up duct work and get pressure hoses made up to fit. You'd still have to figure out the control board - would you use the Fox control panel or aftermarket or ____? As the others have said, by the time you do all that, factoring in your time, you'd probably be better off going with a COTS (commercial off the shelf) system. Nate 1 jkish reacted to this Quote Share this post Link to post Share on other sites
