REmmm 6 Report post Posted March 26, 2019 Hello everybody. I'm posting here because it's the mess with my throttle spring and brackets on my carburetor & intake manifold. Everything as been linked no matter how and I'd like to put this in order. Here is my current configuration: Stock 351C Intake manifold: Edelbrock Performer 2750 Carburetor: Edelbrock Thunder 1806 If somebody can give the parts I have to use to have a (very) clean installation and especially safe. My throttle cable is not in a very good shape neither. I can post pictures if needed. In advance, many thank for you help on this. Excuse my bad english, i'm from Belgium. Rem Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted March 26, 2019 Hi, are you looking for originality or is it not so important? Also - perhaps 351C guys can chime in on this - 351 Clevelands doesn't work very well with Edelbrock/Carter type carburetors. You should run a Holley 750HP. Quote Share this post Link to post Share on other sites
REmmm 6 Report post Posted March 26, 2019 Originality is not so important for me. I just want something very clean and how it should be to be. I attach a picture of the current setup. Nightmare :D Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted March 27, 2019 This one should work with your setup. https://www.summitracing.com/int/parts/aed-6701bk/overview/make/ford Quote Share this post Link to post Share on other sites
REmmm 6 Report post Posted March 27, 2019 Thank you for your help on this. Any other stuff to buy like new springs? Bolts? Thanks! Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted March 28, 2019 AED makes some nice stuff. I use their metering blocks on a Holley 650 HP carb. With that said, I don't know if that cable bracket works with the cable used on these cars. I think it's for the later style cable that uses a bolt to retain the cable end to the bracket and not snap in like on these cars. But if you purchase it from Summit or Jegs you can easily return it if it doesn't work. You will need longer carb mounting studs for the bracket side. You should replace those bolts with studs anyway to mount the carb to the intake. Quote Share this post Link to post Share on other sites