yamahasrx700 14 Report post Posted February 16, 2019 Does anyone have a source for the gasket on a pop open cap. The one that seals the cap to the filler tube. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted February 16, 2019 I don't know if a replacement is available. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 17, 2019 I made mine out of cork. Quote Share this post Link to post Share on other sites
mqu02 30 Report post Posted February 17, 2019 I am pretty sure I used this one on a Mach 1 pop open cap when the repro had too much of a gap when it closed. GASKET Fuel Cap repro on cap to filler. I think I used 3M weatherstrip adhesive to keep it in place. Quote Share this post Link to post Share on other sites
Alan_Mac 48 Report post Posted February 23, 2019 I eliminated the gasket tube seal assembly and added a twist on cap. The cap fits under the Mach 1 flip open assembly. The flip open doors could be a huge fire hazard if hit from the rear. Quote Share this post Link to post Share on other sites