Tcoco 5 Report post Posted February 9, 2019 Need some help 69 coupe 302 with an Edelbrock carb and an aluminum intake and a C4 tranny with a kickdown bar. I would like to use the oem cable and kickdown but I had to jerry rig a cable bracket don’t want to go lokar and the 2v bracket doesn’t work it stretches the cable who’s using what? Thanks Quote Share this post Link to post Share on other sites
Her69fastback 3 Report post Posted February 10, 2019 I put a Holley & edelbrock intake on the wife’s 69. I had to madify the bracket because of the vacuum hose coming out the back of the card. Cut it & put a small peice of a tube cut in half in it Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 10, 2019 I am going to be using the factory 4bbl accelerator cable bracket. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 10, 2019 The stock bracket worker fine on my Weiand Stealth and Speed Demon carb. Quote Share this post Link to post Share on other sites
MN69Grande 203 Report post Posted February 11, 2019 When I had an Edelbrock we modified a 302 2v bracket just slightly to deal with the vacuum on the back similar to above. just took some metal out really. For the kick down we cut and extended the little tab of metal that connects to carb. However Holley now has a kick down extension you can buy. Funny though I didn't need the extension with a Holley 4 bbl just with the Edelbrock. But I eventually went with a lokar cable and bracket. Much happier the stock cable would bind for me. Here is the kick down extension https://www.summitracing.com/parts/HLY-20-41 This bracket came up when I was looking for the kickdown link. It looks like it might be worth considering https://www.summitracing.com/parts/sum-g1419 Quote Share this post Link to post Share on other sites
J's69Mach1 17 Report post Posted February 11, 2019 I am using this bracket but mine is 5 speed manual. Got it from Sanco Specialties. It clears my AED (holley) 750 Carb , on top of a edelbrock rpm intake. Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted February 11, 2019 A couple of things I have discovered using the stock 4 barrel linkage bracket with universal Holley 4 barrel carbs. First, it will only bolt on with vacuum secondary carbs and not mechanical secondary carbs. Second, if you attach the linkage ball to the predrilled hole that's intended for it in the Holley primary throttle lever you will not get full throttle. I had to modify mine both to fit a mechanical secondary Holley 4 barrel and to get full throttle. NPD use to carry the stainless bracket J's 69mach1 is using. But for some reason it's discontinued. Maybe there are other sources for it. Quote Share this post Link to post Share on other sites