Mike65 475 Report post Posted February 2, 2019 During this cold stretch of weather I am trying to stay busy & fell like I am accomplishing something on the Mustang I took both of the front fender extensions out of the trunk & was removing the old mostly seized headlamp adjusters. Both of the front fender extensions I purchased used Ford pieces & I found on one of the extensions both of the adjusters were screwed in, & on the other one adjuster is screwed in & one is riveted in. I am thinking (which I know could be dangerous) that originally they were riveted in & the replacements were screwed in. I checked on the CJPP web site for replacements & the replacements are shown with screws to secure them to the extension housing, am I correct?. https://www.cjponyparts.com/69-headlamp-adjusters-28-hardware-only-1969/p/F3990/ Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted February 2, 2019 Original adjusters on my 69 Grande are screwed in. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 2, 2019 A couple of the adjusters are riveted in & the rest are screwed in. In the pic below one was screwed in & the other one had one rivet & one screw on the same adjuster. Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted February 2, 2019 Screws are correct Quote Share this post Link to post Share on other sites