very fat and very dumb 40 Report post Posted January 19 My painter didn't paint the entire fender extension and I'm afraid a lot of it will be visible when the hood is open. I'm looking for a photo of the visible areas when the hood is up so I can see what I need to paint. I sold my 69 convertible that I used for Chinese blueprints and I just don't recall how much you can see. Thanks in advance. u Share this post Link to post Share on other sites
RPM 698 Report post Posted January 19 Can ya post a pic of your fender extension/ headlight bucket? The inner light mounting area behind the light on mine was painted black, not the body color. Share this post Link to post Share on other sites
Brian Conway 147 Report post Posted January 19 Actually pretty hard to see in there. With a flashlight and with my head even with the grill I can see slight body color over spray at the perimeter. Mostly the rest of the inside is a grey/primer color. Don't think a picture will tell you even that much ? Brian Share this post Link to post Share on other sites
fvike 136 Report post Posted January 19 The headlight bucket isn't supposed to be all one color. It should have a black-out area, painted by a brush. https://pin.it/cjyaxgzwhnsn63 http://www.concoursmustang.com/forum/index.php?topic=9875.0 Share this post Link to post Share on other sites
Ridge Runner 545 Report post Posted January 19 I have seen them painted by brush and what looks like rattle can in black Share this post Link to post Share on other sites
very fat and very dumb 40 Report post Posted January 20 Good info on the black areas. Here’s what I’m looking at, it seems it should be body color. Share this post Link to post Share on other sites
fvike 136 Report post Posted January 20 Yeah, I agree. Share this post Link to post Share on other sites
RPM 698 Report post Posted January 20 Every original paint mustang headlight bucket I've seen had the high beam housing painted black. But it's your car, do what you want. Unless you're a concours snob :) Share this post Link to post Share on other sites
Ridge Runner 545 Report post Posted January 20 With it being behind the grill i would paint it black so it blends in with the back ground 1 RPM reacted to this Share this post Link to post Share on other sites
aslanefe 62 Report post Posted January 21 Both front and back of the inner light area is originally black on my car. The tab that the grill mounts to is also black. The area between inner and outer lights on the inner light side is body color over spray but chrome trim covers it. Share this post Link to post Share on other sites
very fat and very dumb 40 Report post Posted January 21 Thanks for all the info, very helpful. I was able to find this on the Concours site. Looks like I'm slapping some pain on with a brush, ugh. http://www.concoursmustang.com/forum/index.php?topic=1344.msg6892#msg6892 Share this post Link to post Share on other sites
newstang 149 Report post Posted January 21 the guy who painted my car did the same thing, everyone asked "did you run out of paint?" so this was my fix. Problem solved :-) 4 mwye0627, RPM, Shep69 and 1 other reacted to this Share this post Link to post Share on other sites