gnatsum 12 Report post Posted January 9, 2019 Hi everyone. I'm working on my 69 Mach 1 which was a factory 4 speed manual transmission car with a 390. Before I bought the vehicle, the engine and transmission plus threw shifter had been removed and an automatic shifter had been installed. The previous owner was running a 351w with an automatic. Not sure if it was a C4 or C6. The clutch pedal had been left in the car, and secured up out of the way. I want to use a C6 automatic transmission, because that's what I have available. I also am installing power brakes with a new power brake pedal. Will I need to remove the clutch assembly in order to clear the brake pedal? Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted January 9, 2019 Yes, but it is very easy. Simple bolt-off. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted January 9, 2019 Ya it's easy, other than being on your back under the dash (: Hey, any chance you care to sell that clutch pedal? If so, I'm interested. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted January 9, 2019 Oh know ,a nother 4 speed conversion ,i better hide my new one haha it took me for ever to find one Quote Share this post Link to post Share on other sites