Len69Coupe 33 Report post Posted December 27, 2018 Replacing the I6 with a 302 and have a question on the motor mount. Does the tang go on the bottom or top of the motor mount. I don't want to have the motor half way in and realize I have them wrong. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted December 27, 2018 Bottom as far as I remember, to keep the rubber mount and engine from sliding down. Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted December 28, 2018 Thanks aslanefe. I'll install it that way. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted December 28, 2018 On my 69 Coupe I have them mounted with the tab on the bottom, but I do not have the engine in yet. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted December 28, 2018 8 hours ago, Len69Coupe said: Thanks aslanefe. I'll install it that way. Just looked at 2 of my cars, the mount on your photo is for right side, left side is mirror image of it; the bracket on the mount attached with a bolt and nut goes towards the front of the vehicle. If you switch them around, the engine will move forward about an inch. Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted January 2, 2019 Mike65 and aslanefe, thanks for the help. If it goes bad I'll let you know, lol. Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted January 14, 2019 Install went well. Thanks for thelp. Quote Share this post Link to post Share on other sites