Bolt in glass diagram.

[Mike65 509]

I am adding bolt in glass to my 69 Coupe & I need a picture of the bolt in door glass or a picture of the diagram. I also need to order the door window guide bushings & need to know how many I need & where they go.

https://www.npdlink.com/product/bushing-door-window-guide-repro-8-reqd-stronger/103765

[det0326 194]

Are you purchasing aftermarket guides, if so those plastic pieces should come with the guides. There are 4 per guide total of 8 per window.  

[newstang 388]

the regulators are a bit different. if I remember correctly the end of the regulator where one of the wheels are has a 90 degree offset and return. I just hammered it flat which is what the 70 regulator is.

[Mike65 509]

I have new repo 1970 window regulators, factory runs, brackets, & glass. All the pieces I have do not have the plastic pieces that are in the link in my first post.

[69RavenConv 307]

They line the U-shaped pieces highlighted below. Two apiece, or four per door, eight total.

[v8ford70 98]

Check out West Coast Classic Cougar Site:- Window Guide, I did & bought 16 thru them of original used ones (8 per window) as they seem to hold the bracket tighter to guide rails than the repo ones.The reviews on their site on the repo ones say that to cut out the play that they used thin plastic under the plastic guides to get them closer to the thickness of the originals.

[Mike65 509]

Thanks for the pic Raven, & the info v8ford 70.

[mustangstofear 608]

I don't think  the guides are available  yet in reproduction. 

[RPM 1,258]

This is pretty much a must read for work on our cars. Don at WCCC says the repo plastic guide inserts look nice, but are thinner than worn used guides, which causes more rattling and not being able to adjust properly. In the vid he says he sometimes has used inserts for sale. He recommends flipping the oem used guide end for end which allows the tubes to rest on the unused portion of the guide. I tossed the repo guides I had after watching his video.

 

[ralt962 11]

One caution with the WCCC video is the bracket position on the glass is different between Cougar and Mustang.  This video states 1" from the edge.  Mustang is 3/4".  I know because I used the 1".  It still works since the guides are big enough.  But its best to use the right dimension.