Jack Wheeler 0 Report post Posted August 4, 2018 I am restoring a 1969 Mach1 big block, that was a very competitive drag race car in it's day. As a drag race car, the original owner cut off the steel brackets on the rear frame rails to which the rubber bumpers attach. Obviously, this was done to make clearance for wide racing slicks. However, as a street car, I would like to find a pair of these brackets. If anyone has an old rusted body which they are parting out, that still has these brackets on it, i would be happy to pay for cutting them off the frame. I can cut the frame away from the brackets, to get down to the bare bracket, which I can then weld to the frame of this car I am restoring. Thank you for any help you can give me. Jack Wheeler (910) 687-0211 Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted August 4, 2018 this is just one place I am sure others has them too. http://www.mustangsunlimited.com/Mustang/Body/Frame-Rails/Rear-Axle-Bumper-Brackets-Pair-1965-1973-Mustang-1967-1973-Cougar.axd Quote Share this post Link to post Share on other sites
Jack Wheeler 0 Report post Posted August 4, 2018 Thanks... Just what I am looking for. Price seems high, but my other source is out of stock. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 5, 2018 We cut them off and throw them away all the time Quote Share this post Link to post Share on other sites
Jack Wheeler 0 Report post Posted August 6, 2018 Do you have any from a 1969 Mustang that you would like to sell? I want an original set and don't mind a little surface rust, as long as it has not damaged the strength of the bracket. As long as the bracket is all there, I can cut away any of the frame rail which remains. Thank you. Jack Wheeler (910) 687-0211 jwheeler1947@yahoo.com Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 6, 2018 We have a 68 that we're just getting ready to remove:) Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 8, 2018 Do you want these bump stops ? Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 8, 2018 Just removed these today :) Quote Share this post Link to post Share on other sites