ralt962 11 Report post Posted June 24, 2018 An old Chiltons manual I have recommends using a support tool between the frame and front upper control arm. They claim shock damage if not used. I was wondering if that is something that is commonly used. Still finishing my car and still have the old shocks on it so have not worried about this issue. I have the drawing from Chiltons that shows the steel piece at 7 3/8" tall. thanks, Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted June 24, 2018 Pretty sure we have discussed this here before ? Your Shop Manual also has it pictured and diagramed. I did have a friend put a set together for me. The Drivers side needs a small tab (pictured) added to clear the fuel line. Brian Quote Share this post Link to post Share on other sites
ralt962 11 Report post Posted June 25, 2018 Thanks, I made up a set today and went to use it on the drivers side. There was the fuel line. I thought there needed to be something added to keep it on the edge and note crush the line. Quote Share this post Link to post Share on other sites