Rsanter 152 Report post Posted May 30, 2018 Yes I know it’s earlier than the range of this forum...... i need a 1966 conv body. I need the body tub to be good. As good as I can get. if it unbolts from the body I don’t care about it that much. Engine ant trans don’t matter why you ask, well I bought a badly wrecked donar car that I want to use to build a convertable Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted May 31, 2018 Ummmm...you do know that all Mustangs are unibodies and one cannot unbolt it from the frame. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted June 3, 2018 On 5/30/2018 at 6:03 PM, Midlife said: Ummmm...you do know that all Mustangs are unibodies and one cannot unbolt it from the frame. Meaning...if it unbolts from the body...such as fenders, doors, etc i need a good body tub or what you are referring to as the unibody Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 7, 2018 Do you have a convert now or is it a coupe . The convert inner structure fits right into a coupe body with the roof trimmed off ,the front upper window brace is the same in a coupe and convert with the roof peeled off ,just needs a couple of square holes cut in the under side . A coupe body is a lot easier to find Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 7, 2018 This is actually a coupe ,i had a wrecked convert and pulled all of the convertible inner structure out and put it in the coupe ,a new set of quarters and hammered and dollied the wheel tubs ad the convert rockers and it has fooled several people . I have built 6 of them that way 2 RPM and Caseyrhe reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 7, 2018 I would like to get my hands on a wrecked 69 -70 convert ,i have a great 70 coupe body to make a convert from Quote Share this post Link to post Share on other sites
barnett468 418 Report post Posted June 9, 2018 On 6/6/2018 at 8:11 PM, Ridge Runner said: I would like to get my hands on a wrecked 69 -70 convert ,i have a great 70 coupe body to make a convert from i know of a 70 convert in so cal for around 7000.00. Quote Share this post Link to post Share on other sites
barnett468 418 Report post Posted June 9, 2018 On 5/30/2018 at 11:41 AM, Rsanter said: i need a 1966 conv body. I need the body tub to be good. As good as I can get. i know of a couple converts but convert builders are not cheap. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 9, 2018 All i really need is the back seat area and the rain gutter under the back window ,i will find one some day Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted June 22, 2018 On 6/6/2018 at 7:12 PM, Ridge Runner said: Do you have a convert now or is it a coupe . The convert inner structure fits right into a coupe body with the roof trimmed off ,the front upper window brace is the same in a coupe and convert with the roof peeled off ,just needs a couple of square holes cut in the under side . A coupe body is a lot easier to find I have a couple coupes and have considered the conversion. i would really like to find a real conv to build using the donar conv I have. It’s a question of time verses money Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted June 22, 2018 On 6/9/2018 at 8:57 AM, barnett468 said: i know of a couple converts but convert builders are not cheap. If they are rust free and solid bodies I may be interested Quote Share this post Link to post Share on other sites