Len69Coupe 33 Report post Posted April 28, 2018 Started looking at the install for the MDL Hyd Clutch Master Cylinder install. Instructions have me confused because they start off talking about converting an Auto Trans Car and the pics don't match my manual car. Should the master cylinder use the stock clutch hole? Don't want to start making new holes when it would seem the stock clutch hole would be the place to install the cylinder. Any tips for installing the system? Couldn't find any good videos of install. Quote Share this post Link to post Share on other sites
larryc94 38 Report post Posted April 28, 2018 Yes it mounts to hole where the clutch rod was Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted April 28, 2018 I installed the MDL hydraulic clutch kit in my 69 Coupe, here are a couple pics under the hood, & under the dash. Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted April 28, 2018 Thanks guys! I think MDL could do a little better on their instructions, or I'm just dense ;) Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted April 29, 2018 Mike65, where did you mount the reservoir? Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted April 29, 2018 12 hours ago, LFugate said: Mike65, where did you mount the reservoir? I made a "L" shaped bracket that I attached to the cowl pinch weld above the power brake booster & attached the reservoir to the bracket. Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted April 30, 2018 Nice job. Thanks for the pic. Quote Share this post Link to post Share on other sites
