Len69Coupe 33 Report post Posted April 24, 2018 So finally getting back to assembling the front end. When I removed the strut rods the bushing cups concave side faced the bushings. Now I'm installing synthetic elastomer bushings that are supposed to be softer than polyurethane, but better life than rubber. Bing searches reveal some photos of the rear cup with the concave side (convex against bushing) facing the rear of the car. People have said this helps reduce the stress on the strut rods. What's the right way? Here's the bushings. https://www.npdlink.com/store/products/bushing_kit_strut_rod_includes_bushings-198690-0.html Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted April 24, 2018 The bushing cups should cup the bushing. That reverse rear cup thing started , my theory, with an incorrect MOOG product. I like that Drake C6OZ-3A187-AR kit. Don't understand why they don't just sell it with the correct C6OZ-3A187-A rubber bushings. Brian 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Len69Coupe 33 Report post Posted April 24, 2018 Thanks Brian. I appreciate the info. Now I can finish the install today. Len Quote Share this post Link to post Share on other sites