jgkurz 52 Report post Posted March 22, 2018 Hi All, I have looked on Scott Drake, NPD, and CJP for these rubber A pillar and door plugs. I can't seem to find them. Does any one have a name, part number, or a link where I could purchase reproduction versions? I know this should be an easy search, but I have looked many times without success. I would be grateful if someone could point me in the right direction. P.S. don't mind the corrosion. The car is being stripped for body work and paint. Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted March 22, 2018 They are molded to the wire casing ,i have pulled them off a cleaned them off and reused them if they are still soft enough Quote Share this post Link to post Share on other sites
jgkurz 52 Report post Posted March 22, 2018 10 hours ago, Ridge Runner said: They are molded to the wire casing ,i have pulled them off a cleaned them off and reused them if they are still soft enough Thank you Ridge Runner. Based on your response I found this: https://www.cjponyparts.com/door-light-speaker-wiring-w-speakers-1969-1970/p/WDP4/ It looks like this harness is for just one side and contains both the door and A pillar plugs. Quote Share this post Link to post Share on other sites
AJV69 2 Report post Posted March 23, 2018 Try McMaster Carr, they have many similar but not exact grommets that could probably be modified to fit. Quote Share this post Link to post Share on other sites
Mach1 Driver 603 Report post Posted March 25, 2018 Maybe these would work; https://lmr.com/item/PE-990/1979-93-Mustang-A-Pillar-Behind-Fender-Rubber-Plugs?utm_source=google-shopping&utm_medium=comparison-shopping&utm_campaign=google-shopping-v2&adpos=1o2&scid=scplpPE-990&sc_intid=PE-990&gclid=EAIaIQobChMIn9D4nauI2gIVi7XACh03GQmzEAQYAiABEgLs4vD_BwE Quote Share this post Link to post Share on other sites
ralt962 11 Report post Posted April 9, 2018 Looks like you need a set of door reinforcement hinge plates also. I have one door set left. As Ridge Runner said, my gromets were molded to the harness. Quote Share this post Link to post Share on other sites
danno 128 Report post Posted April 9, 2018 as these are electrical, I would bet midlife would have exactly what you need. Send him an message Quote Share this post Link to post Share on other sites
Midlife 840 Report post Posted April 9, 2018 Ummm....I have a very limited supply of door harnesses, none of which are complete. If the OP is interested only in the rubber plugs without wires extending more than a couple of inches in either direction, I can probably help out. I believe the door speaker/light harnesses are reproduced for 69/70... Quote Share this post Link to post Share on other sites
69ShelbyGT350H 61 Report post Posted April 10, 2018 7 hours ago, Midlife said: Ummm....I have a very limited supply of door harnesses, none of which are complete. If the OP is interested only in the rubber plugs without wires extending more than a couple of inches in either direction, I can probably help out. I believe the door speaker/light harnesses are reproduced for 69/70... Yes, just purchased a pair for my car. Got the ones with the speaker wires so I can add my power door lock actuators. I do not have speakers in my doors. Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted April 24, 2018 I found somthing that is almost a dead ringer for the main door wiring plug . It is the tail light groment for a 2001 Expedition tail light wire and it slides right off the wires ,it is behind the tail light ,hit those wrecking yards. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted April 24, 2018 Here is a better pic ,look familiar? And they are very flexable Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted April 24, 2018 They look like the same plug ,but they are just the slightest bit smaller and fit loose in the door Quote Share this post Link to post Share on other sites
