v8ford70 98 Report post Posted March 15, 2018 Has anyone got any photos of a 1970 D/Side Bullet mirror cable placement & how it is held inside the door shell.Any photos of how the latches & internal mechanisms stoppers etc are attached inside the door & also inside Rear quarter panel (coupe).Would be very much appreciated.Cheers Phil Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted March 16, 2018 On 3/14/2018 at 11:55 PM, v8ford70 said: Has anyone got any photos of a 1970 D/Side Bullet mirror cable placement & how it is held inside the door shell.Any photos of how the latches & internal mechanisms stoppers etc are attached inside the door & also inside Rear quarter panel (coupe).Would be very much appreciated.Cheers Phil There is a plastic cable holder about 1 inch diameter that is attached to the door under the top hinge with one screw (screw is on the front outside of the door, cable holder is inside the door). Cable from the mirror goes forward, goes through the cable holder and comes back to the door panel. This cable holder keeps the cable away from the window. I think, window stops (Lshaped bracket with plastic dipped ends), the ones with 2 bolts go on the back of the door (above door latch) and front of the quarter (above the door catch). The stops with one bolt goes towards the top of quarter under the interior panel and towards the front of the door under door panel. Quote Share this post Link to post Share on other sites
