69mach1build 22 Report post Posted January 23, 2018 I am getting ready to install my engine and trans and before I finalize the order on my crossmember I wanted to see if anyone has had good or bad luck with their crossmembers. Engine 351 Windsor Here's the one I am currently looking at: https://www.summitracing.com/parts/awr-xffo10101 Quote Share this post Link to post Share on other sites
Wildpat 0 Report post Posted January 29, 2018 ZRay on "the" other forum sells dam' good ones, beefier and can come with a pad. Reasonable price. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted January 30, 2018 10 hours ago, Wildpat said: ZRay on "the" other forum sells dam' good ones, beefier and can come with a pad. Reasonable price. His link above is for a transmission cross member. That makes me think he's not looking for one of ZRay's engine cross members. Quote Share this post Link to post Share on other sites
bw_kc 11 Report post Posted January 30, 2018 My stock cross member for a C6/428 worked perfectly with my TKO 600 swap. Quote Share this post Link to post Share on other sites
Wildpat 0 Report post Posted February 3, 2018 On 1/30/2018 at 1:04 AM, RPM said: His link above is for a transmission cross member. That makes me think he's not looking for one of ZRay's engine cross members. Yep. my bad! Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted February 4, 2018 Here's what we make http://shop.mustangstofear.com/index.php?main_page=product_info&cPath=1_17_373&products_id=429 Nice thing about ours, is you don't use the factory mounting holes. This makes it easier to move the brace anywhere along the framerails and drill new holes. Quote Share this post Link to post Share on other sites
