JayEstes 172 Report post Posted March 15, 2018 On 3/14/2018 at 12:57 AM, TexasEd said: I decided to order a new set of stainless lines for the front of the car. I'm planning on taking off the distribution block and cleaning it. Any tips on this? I'm nervous about what appears to be the brake light warning sensor. OK, well I strongly recommend you rebuild the proportioning valve (brake distribution block). There is a great rebuild kit and musclecarresearch.com with fantastic instructions. Make sure you order the right rebuild kit for your distro block. I learned some hard lessons doing one, you can read about it here: https://www.7173mustangs.com/thread-rear-brake-issues-don-t-let-this-happen-to-you Lot of stuff on 7173mustangs applies to our cars, and that thread is a recounting of some issues I had. It should have some good tips on how to rebuild the block. Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted June 11, 2018 Got the Master Cylinder bled and mounted on the booster. Started attaching the lines and man is space tight. Got half on tonight and will do the rest tomorrow. Quote Share this post Link to post Share on other sites
