det0326 179 Report post Posted September 27, 2017 I am in the process of figuring out what all I need for my stock A/C to finish up the unit. I installed a new evaporator when i did my heater/A/C box restoration a while back. I need to get a new condenser and dryer yet. My main concern is how to route the hoses so I need pictures of the routing from evaporator to the condenser. Also a good pic at the evaporator where the expansion valve is installed on the lines. If anyone can post pictures I would be greatful. Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted October 7, 2017 Had a lot of views but no replies. There seems to be 2 different expansion valves listed for the 69 one with 180* ports and one with 90* ports. Can anyone confirm which is correct for the 69 year? Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted October 7, 2017 Hi Dave, tomorrow I should be able to post some pictures Quote Share this post Link to post Share on other sites
jjstang 51 Report post Posted October 8, 2017 I would be curious if someone figured out a more hidden route than the factory route. Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted October 8, 2017 Here ya go- this is stock, old and dirty Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted October 8, 2017 Thanks a lot Terry for the pictures, that is just what I needed. I see that the expansion valve is the one with 180* ports that was another concern of mine. If there is anything I can help you with don't hesitate to ask. thanks again for taking time to do this for me. Dave Quote Share this post Link to post Share on other sites