69´ 302 swap to 351 (accesory mounting bracket need)

[MUST 25]

Hi guys,

I know I need some parts..
And I would like to use stockparts.
 

But my only question is:
Which accesory mounting bracket do I need exactly for power steering and which for Alternator?
It would be awesome if someone could answer me part numbers or link :)

 

Thank you!

Tom

[1969_Mach1 333]

For something like that, it's easiest to just buy the reproduction brackets.  They'd also be less expensive than used OEM brackets.  But you first need to know if your 351 is setup with the lower radiator hose on the drivers side or the passenger side of the car.  Different brackets for each setup.

[MUST 25]

okay but someone could give me a link?

this is my 302 setup

[1969_Mach1 333]

Here are a couple of links with brackets.

Alternator bracket, repro from NPD:

https://www.npdlink.com/store/products/bracket_alternator_upper-145979-1.html

Power Steering Pump Bracket from West Coast Classic Cougar:

https://secure.cougarpartscatalog.com/c9oz-3k505-a.html

Alternator bracket from West Coast Classic Cougar:

https://secure.cougarpartscatalog.com/c9ze-10a336-a.html?attribs=88

You will need a shorter bolt for the alternator pivot.  Do not transfer that 1/2" bolt long spacer on the power steering pump to the 351W.  The new 351W PS bracket takes up that thickness.  All your other 302 brackets should transfer to the 351W.

 

FYI:  If you are not using headers, the 351W has different exhaust manifolds than the 302.

[Vicfreg 771]

If you give me the stock part numbers, I have some 351 W brackets, as I went to a serpentine system.  Let me know if you need them.

MustangTek has a great site to identify these

http://www.mustangtek.com/Fordparts/FordandMustangbracket.html