KT 69 12 Report post Posted September 14, 2017 about to install the front fender extensions my car did not have fenders so I have only aftermarket parts and nothing prior to guide how the seals go on? Looks the three studs are held on with the fender washer not certain where the seals go is that it there some other holes in the fender flanges? Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted September 14, 2017 Seals are U shaped and they fit on the 1/4" wide rail below the edge of the light bucket where it meets the fender Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted September 14, 2017 You need to install the trim on the buckets first before installing bucket on the fender. It's also easier to install the headlight cups too with the buckets off. 1 KT 69 reacted to this Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted September 14, 2017 Here's a good video 1 KT 69 reacted to this Quote Share this post Link to post Share on other sites
KT 69 12 Report post Posted September 14, 2017 Nailed it thanks!!!!! Quote Share this post Link to post Share on other sites