MAC390 327 Report post Posted September 11, 2017 Getting ready to buy some new rims. Front 15/7 inch with 4 inch back spacing. Rear 15/8 with 4,1/4 inch back spacing. Chrome 12 slot steel wheels , will these work with car. Thanks. Quote Share this post Link to post Share on other sites
NordicDawn 7 Report post Posted September 11, 2017 I went with OE steel wheels 15x7 - 4,25BS and 15x8 - 4,50BS just to be safe. It's the same as standard Magnum 500's with the same width. Quote Share this post Link to post Share on other sites
bigmal 225 Report post Posted September 11, 2017 I have 7x 15 Magnum 500s with 225/60 on the front and 245/60 on th erear. The rears look a little balloony so I will be going to 8/15 on the rear. I can use one of the old wheels for the spar although a little bulky. Quote Share this post Link to post Share on other sites
JET 445 43 Report post Posted September 12, 2017 Your front will be fine but 4.25 backspace will not work on the rear, 4.5 will work with a 235 but if you want to fit a 245 I think 4.75 will be safer, this is for standard fenders, if you flatten the lip you might be able to use 4.25 backspace. I am looking at same size wheels in the Superlite from Transam Race Engineering, very nice wheel and cheap as-$250 per wheel. Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted September 12, 2017 Thanks, Will go with 4.25 backspace for front and 4.50 for rears. Quote Share this post Link to post Share on other sites
JET 445 43 Report post Posted September 12, 2017 Buying the wheels is easy, the real hard part is finding tires for the 8 inch rims, you only have about 4 choices and they are all crap. Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted September 12, 2017 Yes i know, in our sizes all crap. have to get the best of a bad bunch. Quote Share this post Link to post Share on other sites