cdanz87 0 Report post Posted June 24, 2017 Im currently working on rebuilding my pumpkin. I started to clean up the pinion support and found a crack. (see pic) on the inside. Is this something that can be repaired or should I just pitch it? Thanks for the help - Chris Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted June 25, 2017 That ridge is to support the bearing race. I would be more afraid of the crack spreading from the rough edges, it does not provide allot of support in that area. If you are on a really tight budget I would pull the broken section out, touch up the rough edges & run it. However, these can be bought for less that $100, much less in some cases, so why risk it? 1 SWPruett reacted to this Quote Share this post Link to post Share on other sites