RPM 1,190 Report post Posted May 27, 2017 I'm hoping someone might know what plugs into this female two prong plug. It originates at the end of the engine harness and is about 6' long. Since the white/green stripe wire connects to the right turn signal and the green/white stripe wire connects to the left turn signal, I'm thinking the plug has something to do with the turn signals. Ya, I'm a trained observer. Might it be for the turn signals on the hood which I changed to a shaker hood? Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 27, 2017 Sounds like the hood scoop plug in ,it goes all the way to the front and plugs into the turn signals ,the hood scoop plug in is by the master cylinder Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 27, 2017 You can unplug that wire and remove it ,it is a jumper between the turn signal and the hood scoop ,just plug in the turn signal after the wire is removed ....dont throw it away .... Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted May 27, 2017 Thanks Jim! Throw it away? Na, I learnt my lesson after tossing my oem: radiator, steering box, power steering pump and brackets, front and rear springs, fuel tank, pitted & chipped windshield, radio... DOH! :( 1 Caseyrhe reacted to this Quote Share this post Link to post Share on other sites