Seat Belt Question

[RobotMan 265]

The 3 point seatbelts I bought for my son's Mach are too short for big guys like me. I have to unlatch the belt to reach a control on the dash. Anyone have a vendor with longer seatbelts or maybe an extension?

Thanks

Rick

[JD08 42]

You might give Seatbelt Solutions a call. I know when I first got mine from NPD, I accidentally got the wrong length. 

[RobotMan 265]

Thanks for info. 

[det0326 198]

5 hours ago, RobotMan said:

The 3 point seatbelts I bought for my son's Mach are too short for big guys like me. I have to unlatch the belt to reach a control on the dash. Anyone have a vendor with longer seatbelts or maybe an extension?

Thanks

Rick

I just ordered this one, haven't got them yet, but the description says plenty of belt length. Don't know what style you are looking for but these are the square push button release and they are made in China not sure if that matters to you. If you are in no hurry I can let you know how they work when I receive them and get them installed.  http://www.ebay.com/itm/232287750292?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[JD08 42]

I should probably mention they actually have measurements for these belts if you call NPD.

[danno 128]

Maybe consider a 4 inch or more bracket on the inside where they connect to the floor.  It would be like making a new hole for it to attach that is further forward?  Just wondering about other options....

[Chelby-Ann 47]

Anyone have pix of this setup in a 69? I would like to replace my lap belts with the 3 point seat belt. Thanks

[RobotMan 265]

Thanks. Would definitely like feedback when you get those installed. 

[Dave R. 85]

17 hours ago, Chelby-Ann said:

Anyone have pix of this setup in a 69? I would like to replace my lap belts with the 3 point seat belt. Thanks

Chelby-Ann, I don't know about the belts that are mentioned here but I used a set from Juliano's Hot Rod Parts in my '69 Mach 1. It had no belts at all when I bought it and Juliano's 3 point belts worked well for me. They have a big selection of belts. The "dumb" end of the shoulder belt and the retractor use the anchor point in the floor and the belt loops up to anchor above the door opening. The factory anchor point are used.Good luck. I don't have a better picture.

[bigmal 231]

I have used RetroBelt 3 point inertia reel belts on the front. I found that they sat too high and would end up on my neck so added 12" drop links. Made all the difference.