tonyinsandiego 37 Report post Posted February 7, 2017 Horn isn't working. Here is what I do know. Horn will work if I remove the steering wheel and short out the little brushes making contact with the steering wheel. The steering wheel has the rim blow horn and it makes contact from the rim switch to the screw terminals. The problem has to be after the screw terminals or the contact of the ring and brushes. Has anyone had an issue with this before? I did not check the continuity between the ring and the rim blow screw terminals. If that's the case, then my entire steering wheel could be shot, Suggestions.... 10 mapedVem, hapedVem, vapedVem and 7 others reacted to this Quote Share this post Link to post Share on other sites
bigmal 229 Report post Posted February 7, 2017 Hi Tony, There is a guy in New Zealand, Gary McNeill who restores rim blow wheels. He has a good reputation and is very reasonalble. Not to mention the US to NZ $. His email is rimblowrestorations@xtra.co.nz he also has a web site www.rimblowrestorations.co.nz I will be sending my wheel to him when I pull it off the raod shortly. Regards, Mal. Quote Share this post Link to post Share on other sites
