mark69sportsroof 31 Report post Posted January 18, 2017 Hi Everyone, I am looking for a new fuel rail for my Quickfuel carb HR 750 mechanical double pumper. I have a Holly one now, but want to run a return line off the backside of the fuel rail with a 1.8" port for the fuel pressure gauge. The Holly does not have the fitting for the fuel return line. My engine builder thought he found one made by Quickfuel but they discontinued it. Does anyone knows a company that makes the fuel rail with the 1/8" port and fuel return line? Thanks Mark 3 ncdruroSor, Selmadox and yapedVem reacted to this Quote Share this post Link to post Share on other sites
1969vert 55 Report post Posted January 18, 2017 How about a return line off the regulator? If you got one..Or a 6an male to female adapter with a 1/8" port for a gauge...Going to the rear of the carburetor...Earls got that...There is a couple of manufactures that have the 1/8" port in a fuel line to a Holley you could tap the other side for another port if you want to... Quote Share this post Link to post Share on other sites
mark69sportsroof 31 Report post Posted January 19, 2017 OK thanks. I will look into it. Mark Quote Share this post Link to post Share on other sites
