JustAnOl'69 4 Report post Posted June 11, 2016 So, I'm trying to sort out all what I need to upgrade my stock manual drums to some nicer manual Bear discs up front, and the same drums in the rear (one day I'll do all manual discs). The issue I'm running into is that I can't figure out what Master Cylinder/Proportioning Valve to match with this combination. As far as the brakes go, I was thinking of either Baer's SSR+ 11.3" rotor kit, or their Track4 13" rotor kit. I'm not looking for anything too fancy as far as this part goes, more for something that I can adjust and that works and isnt too expensive. I'm open to suggestions! Thanks SSR+ http://www.cjponyparts.com/baer-disc-brake-kit-front-ss-4-1965-1969/p/DBF170R/ Track4 http://www.cjponyparts.com/baer-brakes-front-disc-brake-kit-13-track-4-1965-1969/p/DBF164-V/ Wilwood MC http://www.cjponyparts.com/wilwood-master-cylinder-kit-tandem-aluminum-black-with-7-8-bore-1965-1973/p/BMC50/ Baer MC http://www.cjponyparts.com/baer-brakes-master-cylinder-remaster-hard-anodized-15-16-bore-with-driver-side-ports-1965-1973/p/BMC54/ Quote Share this post Link to post Share on other sites