Print Dad 58 Report post Posted May 1, 2016 Hello All,Once again I turn to the Pro's for some help.I have a 2 part question - I am trying to help a buddywith his 70 Fastback - - 351C - 4 speed - power steering. I realize this is not a total tech question but this does kinda deal with tech issuesThe car needs a lot of work but it is a long term project.Tonight we were looking at the "clutch release lever or fork" and it hasbeen welded a bit by a previous owner.So question #1 - does anyone know the part number for this original partThis leads to my second question which is kinda stupid I guess as I have had our 70 Mach for about 40 years,Question 2 - - Although I consider the 351C a small block and I am pretty certain that is how Ford categorizes it - -there is always some confusion when buying parts.for example - on e-bay - there are about 4 "forks" that say they are for a Boss 302 or big block motors.This leads me to some confusion - -will the fork from a big block fit my friends 351C - -2 barrel heads if that matters although I don't think it would.So I need to know what you guys think. I have had the same issue with simple things like chrome alternator brackets - -they say "small block" and mention the common 302, 289 -351W etc - -but I get confusedSo although Ford may consider the 351C a small block - what do the parts repo people consider our motorsI know this is a silly question but need advice and opinions from some of the members hereas always - -Thanks in advance - Print Dad - -(Sam) 2 winifredng69 and ceciletf18 reacted to this Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted May 1, 2016 Hey Sam, nice to see you back. I'm no help with the fork, but the big blocks start with the 390. A stroked 302 or 351 is still a small block, even though the new displacement may be over 400 cid. Quote Share this post Link to post Share on other sites
barnett468 418 Report post Posted May 1, 2016 Quote Share this post Link to post Share on other sites
Print Dad 58 Report post Posted May 2, 2016 Hello All, First - - Mach1 Driver - - I understand the motor sizes as defined by Ford and have been running small blocks since the 60's - -where I get confused is when people say - -fits this or that especially with the small blocks which I consider all the stuff like 260, 289. 302 351W etc - - Heck I recall the Yblocks and all that ​but still I get confused because I consider the 351C a small block but many of the parts for ​the 289s act won't fit Barnett468 - -perfect - -thanks so much. This will help him a LOT He and I both like to buy NOS parts when possible but many people say that it will fit this and that - -but at least with a part number we should be able to tell what will fit If you guys get a second -please check out flea bay and see the several "forks" that they say will work I am not certain they will Thanks again for the great help Be well - -work safe - -Sam Quote Share this post Link to post Share on other sites
barnett468 418 Report post Posted May 2, 2016 No prob. If you want an NOS one let me know . I or a friend of mine may have one. Quote Share this post Link to post Share on other sites