nickjames138 15 Report post Posted April 20, 2016 I'm doing the 70 bolt in conversion on my 69 mach and Every single time I get my mechanic friend to take off work to help me I'm missing another part. This is the last part and I'm having the hardest time finding it. It's the "Regulator Pivot for Window Bracket" on http://www2.cougarpartscatalog.com/23274-1970.html But I need the bushings, nuts, washers that it also shows in these pictures. NOBODY SELLS THEM OR REPRODUCES THEM! Does anyone have these, know where I could get them, know an easy makeshift without having to fabricate one? I don't have a garage nor the tools to fabricate. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted April 20, 2016 Dynacorn makes a complete for this. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 21, 2016 I'd give Don at West Coast Classic Cougar (WCCC) a call. Quote Share this post Link to post Share on other sites
nickjames138 15 Report post Posted April 23, 2016 I'd give Don at West Coast Classic Cougar (WCCC) a call. Don didn't have them in stock! Found a place fairly close to me that has them! They have EVERY part in stock imaginable for Mustangs. Mustangs Etc. Quote Share this post Link to post Share on other sites
Bruebaker 0 Report post Posted May 8, 2022 I need this same setup. Where did you find them? Thanks! Quote Share this post Link to post Share on other sites
69RavenConv 286 Report post Posted May 9, 2022 I'm not @nickjames138 but I think he meant Mustangs, Etc in L.A. https://www.mustangsetc.com/ 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites