RobotMan 264 Report post Posted November 18, 2018 Mike and I got the trunk and quarter extensions mounted to verify fit of all parts in back. Getting close to being ready to final weld back together! 3 fvike, Ridge Runner and bigmal reacted to this Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted January 22, 2019 Been a while since I posted an update. Mike and I have got the entire back of the car welded together, the floor pan fitted, and subframe connectors installed. Also, moved the seatbelt connection points back 3” to allow the seats to move back for big guys like us! 3 mach1cj, Grabber70Mach and RPM reacted to this Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 23, 2019 Looking good. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted March 23, 2019 We finished removing and welding a new roof skin to replace the one with 50 drilled holes and bondo stalagtites hanging from the ceiling. Mike was excited initially as he had a temporary sunroof! 2 Grabber70Mach and mikee reacted to this Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted March 23, 2019 So you're not installing a sunroof :) Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted March 23, 2019 Wow ,you guys are coming along very nice . I love that pic with the roof removed Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted March 23, 2019 53 minutes ago, mustangstofear said: So you're not installing a sunroof :) The first 69 full glass top Mustang ! Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted March 23, 2019 1 hour ago, Ridge Runner said: The first 69 full glass top Mustang ! It’s called the panoramic full view option! Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted March 23, 2019 Peek a boo roof haha Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted March 23, 2019 Graft a late model one from Classic Design :) 1 Ridge Runner reacted to this Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted March 23, 2019 4 hours ago, Ridge Runner said: Wow ,you guys are coming along very nice . I love that pic with the roof removed We are putting rust inhibitor on bottom and floor pan. Will start seam sealing next before taking off of rotisserie. 1 Ridge Runner reacted to this Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 24, 2019 The sub frame connectors are they ones you made or did you buy them?. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted March 24, 2019 5 hours ago, Mike65 said: The sub frame connectors are they ones you made or did you buy them?. I bought them. They are Tinman subframe connectors. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted May 15, 2019 Mike and I had a big day this past weekend. We finally got the car off the rotisserie and all painted with rust inhibitor. Just have a little lower quarter work to finish that could not be done on rotisserie. 2 Grabber70Mach and Ridge Runner reacted to this Quote Share this post Link to post Share on other sites
newstang 388 Report post Posted May 15, 2019 who's gonna mow the other half of that lawn :-) 2 Caseyrhe and RPM reacted to this Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted May 15, 2019 RobotMan, The rust inhibitor you used is the the Master Series Silver?. I used that on my 69 Coupe to coat the interior side of the floor pans & the firewall, & the whole engine bay inside & out like you did. Then I covered silver inside & out of the engine bay with chassis black from Master Series. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted May 16, 2019 15 hours ago, Mike65 said: RobotMan, The rust inhibitor you used is the the Master Series Silver?. I used that on my 69 Coupe to coat the interior side of the floor pans & the firewall, & the whole engine bay inside & out like you did. Then I covered silver inside & out of the engine bay with chassis black from Master Series. Yes it is. I will do the same. Did it on my others sons car as well. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted May 16, 2019 On 5/15/2019 at 6:27 AM, newstang said: who's gonna mow the other half of that lawn :-) That’s what I have 2 boys who build cars for! 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted May 16, 2019 Your work and progress is impressive. Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted May 17, 2019 8 hours ago, RPM said: Your work and progress is impressive. Appreciate the compliment! Is definitely a lot of work! Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted June 3, 2019 Big day tomorrow! Mike and I are taking the car to the paint shop! 4 Ridge Runner, Grabber70Mach, Arvidsson and 1 other reacted to this Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted June 3, 2019 Congrats to the both of you. What color is it going to be? Are you looking to adopt another son that needs body work done on his Mustang? Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted June 3, 2019 Alcupuco Blue. Hope to have done early July. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted June 18, 2019 Amazing work guys! Keep it up! Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted June 19, 2019 Thanks for the support! Quote Share this post Link to post Share on other sites
