JamesS 10 Report post Posted January 29, 2016 Hey there. I need a new passenger rear quarter and wheel housing, floor plan, boot floor and hood. Who do you recommend as the best fitting for these parts? Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted January 29, 2016 Hi James . I fit a new rear quarter and wheel housing last week for my fastback. All Dynacorn gear and went together better than I thought . I fit the trunk floor a few years ago also Dynacorn and fit pretty good. The floor pan patch panels up front fit ok but the edge of the panels were folded the wrong way and the ribs don't match a 69. I can't remember who made them but a got them from NPD. They may be better now. As far as hoods go I hear Dynacorn are not great. You mentioned boot so I gather your an Aussie like me so if so give the mustang/falcon GT guys a call in Brisbane . Mustang Auto Parts. They import most mustang parts direct from the manufacturing plants in Tiawan and are pretty good on price. They source panels from different plants as some make better panels for different parts of the cars. I was going to purchase a dynacorn hood but they said they won't stock them as the quality was poor. 2 det0326 and JamesS reacted to this Quote Share this post Link to post Share on other sites
Dave R. 85 Report post Posted January 29, 2016 I purchased Dynacorn quarters for my '69 sportsroof at the request of my restorer. He had used Dynacorn panels before and had nothing but good things to say about them. Fortunately I didn't need any other sheet metal so I can't comment on the other panels that you need JamesS. Good luck. Dave R. Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted January 29, 2016 Shep is 100% correct. That is what I experienced also. Dave Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted January 29, 2016 Dynacorn ,the rest just will not fit Quote Share this post Link to post Share on other sites
JamesS 10 Report post Posted January 30, 2016 Thanks guys. Dynacorn Sounds good except for the hood Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted January 31, 2016 Just got some Dynacorn aprons and they look great, heavy gauge, only some minor wrinkling on the battery tray apron. Nothing a lil dolly work can't fix. Quote Share this post Link to post Share on other sites
STL. Mark 11 Report post Posted February 1, 2016 James I will add to the Dynacorn list. I replaced both rear quarters on my sports roof and the body shop that put them on said they had no issues. Quote Share this post Link to post Share on other sites
sleek98 12 Report post Posted February 2, 2016 I also will jump on the Dynacorn train. Used them in 2 different jobs on my car. First round was frame rail/shock tower/apron piece for both sides, torque boxes, toe boards and floor pans. Then when I got in a wreck the same body guy did the work again and used their hood, core support, front valance and drivers fender. Quote Share this post Link to post Share on other sites
