55Mach1 10 Report post Posted August 9, 2015 I replaced the pass side which you can buy a new glass unit from major catalogs but nobody offers anything for thr adj drivers side which used thr cable and 4 prongs to picot the glass. Does anyone or has anyone done this and if so how? Quote Share this post Link to post Share on other sites
Raven R code 281 Report post Posted August 10, 2015 There Is a way to remove the cable assembly from the mirror. I did it to get the glass out in order to paint....in couldn't tell you how to do it without looking at it again. It actually comes apart very easily once you know,what to do. Quote Share this post Link to post Share on other sites
SunnDogg 18 Report post Posted August 10, 2015 https://www.youtube.com/watch?v=-PQw_J52CU0 Sorry. This is for the RH side. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 10, 2015 If it's just the glass that's broken, then I cut them myself all the time. Quote Share this post Link to post Share on other sites
Brian Conway 268 Report post Posted August 10, 2015 Could be wrong but I seem to remember that if you slant the mirror and I mean really slant the mirror you can see a set screw that holds/releases the post. Brian Quote Share this post Link to post Share on other sites
55Mach1 10 Report post Posted August 11, 2015 Nobody makes a replacement remote mirror glass. Mine isnt broken just very dull and hazy id like to replace. Quote Share this post Link to post Share on other sites
SunnDogg 18 Report post Posted August 11, 2015 West Coast Cougar has some in their online catalog... http://www2.cougarpartscatalog.com/c9wy-00915.html?attribs=87 http://www2.cougarpartscatalog.com/69sprtmirlenspass.html?attribs=87 From their listing... *NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS. 2 JayEstes and 69RavenConv reacted to this Quote Share this post Link to post Share on other sites
JayEstes 173 Report post Posted August 12, 2015 I've heard of guys just going to a glass shop and having a piece of mirror cut to the correct size and just glued over the old one. This might be a good solution if yours is just dull and hazy like 55mach1's. It will move the surface back the thickness of the new glass, but probably not too noticeable in general use ... Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted August 12, 2015 West Coast Cougar has some in their online catalog... http://www2.cougarpartscatalog.com/c9wy-00915.html?attribs=87 http://www2.cougarpartscatalog.com/69sprtmirlenspass.html?attribs=87 From their listing... *NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS. I'll bet their made by Burco, that's where we get all of ours. Quote Share this post Link to post Share on other sites
