first69 19 Report post Posted July 7, 2015 My interior panels are pretty beat up. Is there a quality replacement? Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted July 7, 2015 Your talking about the interior rear passanger compartment panels on each side of the seat correct? If so there are no good repops LOL. Hit up Ridgerunner on the boards hes the local fiberglass guru and sold me a set he made from an original set that are spot on nice and well worth the money. Quote Share this post Link to post Share on other sites
Bill_C 3 Report post Posted July 16, 2015 Definately don't buy the ones with the speaker pods built into them. I made that mistake. The driverside needed trimming to somewhat fit decent. The passenger side, forget it. I think I had about half an inch gap where the top of the panel ended to where the quarter window started. Plus all the screw holes needed to be located and drilled out. I tossed them out in the yard and put the originals back in. I think the ones I bought were Drakes. Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted July 17, 2015 Bill C. I'm with you, they are Total Shit and a complete waste of money. 1 Bill_C reacted to this Quote Share this post Link to post Share on other sites
THE EVIL TW1N 12 Report post Posted July 18, 2015 I'm pretty sure Repop doesn't make them, but even the other companies who reproduce them aren't too good. Mine were cracked pretty good and had some extra holes from whatever the previous owner drilled into them. I repaired with epoxy and filling in the holes. Then I used an interior texture spray (you'd have to go to a specialty automotive paint store) and sprayed them. I 100% cannot tell the areas that are repaired. Quote Share this post Link to post Share on other sites
Bill_C 3 Report post Posted July 18, 2015 Evil Twin I had to do some repairs on my originals too. I glassed some washers to the backside so the screws would hold and repainted with NPD's semi gloss interior paint. Not perfect but you would really have to look close to see the stress cracks. By the way that is one sweet looking ride. Quote Share this post Link to post Share on other sites
Rsanter 158 Report post Posted July 18, 2015 Are you talking fastback, coupe or conv I have coupe ones I can part with Bob Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted July 19, 2015 We make the complete interior. http://www.mustangstofear.com/page.php?page=parts_catalog&yr=69-70&cat=interior∏=complete_interior_package Quote Share this post Link to post Share on other sites
ashleesmach1 28 Report post Posted July 19, 2015 yeah I got the repos as well , ( the originals were shot) they ok but the they are a little short when I lower the back seat. the ridge that the back sits on is not wide enough. wish someone would make them right. Mustangs to fear do you make them right? I sincerely doubt it. oh yeah, I have a fastback. Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted July 19, 2015 I have them but the panels are not perfect .They have a spot were the lower part of the rear seat rubbed a smooth spot ,but it is hidden by the seat bottom .One side has small spider cracks that transferred from the original i made the molds from but it is very light .They are fiberglass and fit well with correct type mounting and grain .If i could find a perfect set of originals i would make new molds ,but that is just about impossible and keep the correct grain. I have the latch covers for the fold down as well and they are perfect and fit very well .The panels are a bit heavier than the factory panels and stronger .Shipping is the real problem ,the shape will not let them stack well so it takes a large box . This is the smooth spot from the seat bottom but it is hidden when the seat bottom is in place I also have a fiberglass trap door ,the grain is perfect and it was made from a dent free door .It uses the stock mounting and hardware . Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted July 25, 2015 yeah I got the repos as well , ( the originals were shot) they ok but the they are a little short when I lower the back seat. the ridge that the back sits on is not wide enough. wish someone would make them right. Mustangs to fear do you make them right? I sincerely doubt it. oh yeah, I have a fastback. Yes, we make a modified replacement and they fit fine. They were made off OEM parts. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted July 26, 2015 Definately don't buy the ones with the speaker pods built into them. I made that mistake. The driverside needed trimming to somewhat fit decent. The passenger side, forget it. I think I had about half an inch gap where the top of the panel ended to where the quarter window started. Plus all the screw holes needed to be located and drilled out. I tossed them out in the yard and put the originals back in. I think the ones I bought were Drakes. Those would have been made by MP products out of AZ. Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted July 27, 2015 Yeah MTF those Panels are PURE JUNK !! I have my set if someone wants them for Free but you gotta pay shipping... I thought about taking them out back and using them for target practice actually.... I was so pissed at the poor fit I cant tell ya how long I fought with these things trying to get a decent fit. Quote Share this post Link to post Share on other sites
ashleesmach1 28 Report post Posted July 27, 2015 Yes, we make a modified replacement and they fit fine. They were made off OEM parts. show us a pic then....I don't believe you! Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted July 27, 2015 A picture is worth a thousand words ....and the words are usually very nasty . I have tried repro parts that i would have made new curse words for . Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted July 27, 2015 Your panel's look good RR, what do you get for them? Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted July 27, 2015 $200 a pair ,like said though shipping has been the problem because they do not stack well so it takes a large box I just sent a set to Florida for $89 shipping ,i didn't think that was to bad . 2 newstang and RobotMan reacted to this Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted July 28, 2015 Nice, I just started teardown for some panel patching and paint so when the time comes and the budget allows you'll have my business. Quote Share this post Link to post Share on other sites
RobotMan 265 Report post Posted July 31, 2015 Ridge runner how long to get a pair of those interior quarter panels? 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted July 31, 2015 Ridge runner how long to get a pair of those interior quarter panels I have a large order i am working on at the moment ,but i could have a set by mid week next week .Do you just need the large seat side panels ? Quote Share this post Link to post Share on other sites
RobotMan 265 Report post Posted July 31, 2015 Yes the large side seat panels. They are $200 plus shipping correct? Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted July 31, 2015 Yes the large side seat panels. They are $200 plus shipping correct? Yes . Quote Share this post Link to post Share on other sites
RobotMan 265 Report post Posted August 1, 2015 I will take a pair. I've had no luck finding any. What do you need to get me a pair going? Quote Share this post Link to post Share on other sites
Ridge Runner 1,154 Report post Posted August 1, 2015 I will start on them this weekend .PM and address Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted August 1, 2015 Hay Ridge Runner , Do you make the hockey stick pieces that fit under the quarter sails . Quote Share this post Link to post Share on other sites
