kevin31 21 Report post Posted June 30, 2015 Hi there, I found out that my MC has a little seepage from the top. Every Time i go for a ride, when I park the car in the garage, I need to wipe the MC. I changed already 2 Times the seal, in perfect condition. No change. Fluid level is at 3/8" from the top. Any ideas about that problem Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted June 30, 2015 That's kind of strange. I have noticed on these master cylinders the outside dimensions of the rubber gasket seems a little small so I have to be very carful when installing the cap. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted July 1, 2015 Check/change the cap. Sounds like it is not providing even pressure to properly make the seal Bob Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted July 1, 2015 or try re-bending the clamp that holds down the cap. I've had issue where it would do the same thing and eventually contaminated my whole brake system which i had to replace everything. Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted July 1, 2015 Check/change the cap. Sounds like it is not providing even pressure to properly make the seal Bob X2 Quote Share this post Link to post Share on other sites
kevin31 21 Report post Posted July 18, 2015 So, i swapped the new cap by an old one (hide in the garage). And now it is perfect. No leak or seapage. Thanks to all of you :-) Quote Share this post Link to post Share on other sites
Guillaume69 150 Report post Posted July 18, 2015 Good News!! ;-) G Quote Share this post Link to post Share on other sites
Rsmach1 71 Report post Posted July 18, 2015 Cool Quote Share this post Link to post Share on other sites
