MichaelJames 12 Report post Posted June 16, 2015 Does anybody have any good pictures with some measurements of what the shaker bracket looks like for a 351w? I found one for sale on eBay in $250 range but that's crazy for something I think we can just make. Quote Share this post Link to post Share on other sites
Gomach1 12 Report post Posted June 23, 2015 I'd like info on this too, I made a crude one that just has a couple of bends in it. A good picture of one with a ruler next to would help Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted June 24, 2015 https://www.npdlink.com/store/products/bracket_shaker_air_cleaner_secures_air-107473-1.html Not sure what that part looks like for a 351. I got one for my 428 and bent/cut it to fit my not stock intake manifold. Brian 2 Brian Conway reacted to this Quote Share this post Link to post Share on other sites
jatkinson 12 Report post Posted June 27, 2015 I put the NPD on my 351 and it fit perfect. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted June 27, 2015 I put the NPD on my 351 and it fit perfect. Which intake manifold are you using? Quote Share this post Link to post Share on other sites
jatkinson 12 Report post Posted June 29, 2015 Sorry, I didn't see he was looking for a Windsor motor. Mine is a Cleveland with stock intake... Quote Share this post Link to post Share on other sites
jag 10 Report post Posted July 14, 2015 I bought the Boss 302 repo bracket from NPD. I then cut the top of the shaker mounting hole to become an "open" v style. This lets the bolt on the Shaker drop right in from the top. Really easy.... Quote Share this post Link to post Share on other sites